Looking for some help to be able to do something like the Amazon fan in the attached picture. The goal is to be able to control the message from my cell phone wifi or Bluetooth. Or even plug in at home from a computer. The led will be spinning around on its own and will not need a fan or motor. Would like to be able to have two ribbons back to back so it can be visible from both sides.
If you need anymore info please ask
So far I've only seen this that is pretty close but would like to use a ribbon like the one on the fan
https://www.tindie.com/products/electromage/electromage-pixelblaze-v2-wifi-led-controller/
If you need anymore info please ask
So far I've only seen this that is pretty close but would like to use a ribbon like the one on the fan
https://www.tindie.com/products/electromage/electromage-pixelblaze-v2-wifi-led-controller/
Attachments
-
97.2 KB Views: 5
-
105.6 KB Views: 5
-
95.6 KB Views: 5
-
473.4 KB Views: 5