Hi. am new to pspice and am trying to get oscillation from this Colpitts Oscillator circuit

the problem is that c5 output isnt connected to anything so simulation wont work ... this can be easy to solve in multisem but i couldnt do it in Pspice .


if you see any other mistakes in my design feel free to tell me

 

No power supply. Look at all the node voltages.

Connect C2 to some resistive load to ground. Try 1K to 1meg.

 

No power supply. Look at all the node voltages.

Connect C2 to some resistive load to ground. Try 1K to 1meg.

thanks a lot it worked fine ..