Facebook
Google
GitHub
Linkedin
Hi Friends,
i want to test a GSM module sim300.
i've tested it with Hyper-Terminal and some AT and it works perfectly.
After i tried the code from EngineerGarage, but when i try with Proteus ISIS, the virtual terminal shows a line with ascii code, why?
i configure the virtual terminal but nothing to do.
Could you help to configure correctly the virtual terminal,
please see attached file.
Thank you
code:
i want to test a GSM module sim300.
i've tested it with Hyper-Terminal and some AT and it works perfectly.
After i tried the code from EngineerGarage, but when i try with Proteus ISIS, the virtual terminal shows a line with ascii code, why?
i configure the virtual terminal but nothing to do.
Could you help to configure correctly the virtual terminal,
please see attached file.
Thank you
code:
Rich (BB code):
void serialcomm()
{
TMOD=0x20; // Mode=2
TH1=0xfd; // 9600 baud
SCON=0x50; // Serial mode=1 ,8-Bit data,1 Stop bit ,1 Start bit , Receiving on
TR1=1; // Start timer
}
void delay(unsigned int value)
{
unsigned int i,j;
for(i=0;i<value;i++)
for(j=0;j<1275;j++);
}
void serial(unsigned char x)
{
SBUF=x;
while(TI==0);
TI=0;
}
void Send2Gsm(char *aaa)
{
unsigned int i;
for(i=0;aaa!=0;i++)
{
serial(aaa);
}
}
void main()
{
serialcomm();
Send2Gsm("AT\r\n");
delay(50);
Send2Gsm("AT+CMGF=1\r\n");
delay(50);
Send2Gsm("AT+CMGS=\"+919016347670;\"\r\n");
delay(50);
Send2Gsm("Hello bad news, your has benn stolen now!!!");
serial(0x1a);
while(1);
}
