Hello guys, Hope u doing well.

I'm intending to use an RC car that drives to GPS locations.
So, I'm intending to make the locations predefined. So, How to do that with Arduino MEGA?

 

First of all you only do it outdoors as GPS won't work indoors.
You use something like this:
http://www.ebay.co.uk/sch/i.html?_f...+shield.TRS0&_nkw=arduino+gps+shield&_sacat=0

 

First of all you only do it outdoors as GPS won't work indoors.
You use something like this:
http://www.ebay.co.uk/sch/i.html?_f...+shield.TRS0&_nkw=arduino+gps+shield&_sacat=0

Yes that's the hardware part, but I'm asking how to do that in terms of codes?

 

I'm intending to use an RC car that drives to GPS locations.

I'm asking how to do that in terms of codes?

Do you want somebody to write the code for you?

 

No I just want a clue, I have NO idea how it works, is there samples or anything like that?

 

If you have to ask....

 

No I just want a clue, I have NO idea how it works...

If you truly don't have a clue and have NO idea how to do this, then you have chosen a project that is too far beyond your current abilities and knowledge. I suggest you start with something a lot simpler and build your skills bit by bit, until you get to a point where you can begin to tackle a difficult task like navigation-- because it IS difficult.

...is there samples or anything like that?

No.