hello folks!
I am starting new over here and curious to learn about the PCB and circuits...!
lets begin with the steps that I need to follow in PCB.

 

hello folks!
I am starting new over here and curious to learn about the PCB and circuits...!
lets begin with the steps that I need to follow in PCB.

Welcome to AAC!

Step 1: Draw a circuit schematic on paper.

 

A new member to PCB design, I would suggest to visit the different websites first and get knowledge about " what are layer stack-up, how PCBs are manufacturered, what are main components like soldermask, silk screen". Before jumping into the design part I would suggest to first learn the very basic things. You can follow phil's lab or any manufacturer blog page like one added here https://jlcpcb.com/blog

 

First decide on what circuit you would like to produce, Down load free Kicad and carry out some of the many tutorials.
As to actually coming up with the final product/board, there are several Chinese Co.s that do it for a couple of $$.
From a final Gerber format file.
e.g. PCBWAY etc.

https://www.build-electronic-circuits.com/pcb-design/

 

Welcome to the cult, the waters warm . It's a really good time to start learning hardware, there's a ton of cool new resources coming to the forefront. If you're looking for general hobbyist projects, I think Adafruit and Sparkfun have the best resources. But if you're looking for a software, KiCAD is obviously a favorite, but I've really liked Flux.ai. There's also some really cool free hardware AI tools coming out, like Zenode to help you read component datasheets!