I have a problem with either the console or the lower motor control board ! I sure could use a wire schematic to diagnose . Controller bd #325795 . Display will display with all 8s but if I disconnect the ramp motor wires from the control bd the display will come on with all lights lit but then the resistance/ramp buttons move up/down on the display but actual function does not work ! Heart rate and workout buttons all work but built in workouts will not auto adjust thru workout ! Also when unplugging ramp wires the auto ramp calibrate comes on . Sure could use a wiring diagram . Thanks so much
Attachments
-
2.3 MB Views: 10