Facebook
Google
GitHub
Linkedin
I am trying to make an EMG amplifier. Here is the circuit for it:
Total gain above 1000.
I have simulated it on TINA.
For the input i have used 50uV and 60uV at 500Hz the input with DC level V. At the output i.e after stage U5 I am getting 9.58mVith -175.1uV DC 6.77mV.
Is my circuit correct?
Total gain above 1000.
I have simulated it on TINA.
For the input i have used 50uV and 60uV at 500Hz the input with DC level V. At the output i.e after stage U5 I am getting 9.58mVith -175.1uV DC 6.77mV.
Is my circuit correct?
