I work for a company that uses a sensor wireless com at 345MHz signal to report back to the PLC Panel, Camera’s, Door Locks, Garage Door Controllers are Z-Wave around 908.2MHz and are POE.
They use a Battery CR2032 3vdc and they continually go out, we have a Takeover device that takes the wired sensors like ADT uses and transfers those connections to a module that will send a wireless com to our panel.
1. I need to know if there is a chip that will DC to DC convert I high voltage such as used on a solar battery, down to 3vdc for the sensor.
2. I need to know how ADT reports open or closed, is it wireless also or TTL design? Like Hall effect which would make sense.
Thanks in Advance,
kv
They use a Battery CR2032 3vdc and they continually go out, we have a Takeover device that takes the wired sensors like ADT uses and transfers those connections to a module that will send a wireless com to our panel.
1. I need to know if there is a chip that will DC to DC convert I high voltage such as used on a solar battery, down to 3vdc for the sensor.
2. I need to know how ADT reports open or closed, is it wireless also or TTL design? Like Hall effect which would make sense.
Thanks in Advance,
kv
Last edited: