Hello everybody,
I was troubleshooting a noise problem which was probably some grounding problem (I strongly believe it is a Ground Loop issue). I used different Audio amplifiers, all of which were having noise problem. But when I use TS4984 there was obsolutely very very less noise. This IC has BTL configuration so grounding doesn't come into picture either in input stage or output stage. Where as in other ICs load should be tied to ground.
My question is: Does BTL configuration help in overcoming ground loop problem?
Can anyone pls explain.
Regards
Kthurst.
I was troubleshooting a noise problem which was probably some grounding problem (I strongly believe it is a Ground Loop issue). I used different Audio amplifiers, all of which were having noise problem. But when I use TS4984 there was obsolutely very very less noise. This IC has BTL configuration so grounding doesn't come into picture either in input stage or output stage. Where as in other ICs load should be tied to ground.
My question is: Does BTL configuration help in overcoming ground loop problem?
Can anyone pls explain.
Regards
Kthurst.