All About Circuits

Develop a circuit to control two motors to the operational specifications

Moe Kabz

Thread Starter

Moe Kabz

Joined Apr 1, 2018
2
Develop a circuit to control two motors to the operational specifications below.


Operational Specifications


1. Motor 1 can be started by operating either pushbutton S1 or S2.

2. Motor 1 can be stopped by operating either pushbutton S3 or S4.

3. Motor 1 cannot start unless motor 2 is stopped.

4. Indicator lamp L1 indicates motor 1 is running.

5. Indicator lamp L2 indicates motor 1 is stopped.

6. Motor 2 cannot start unless motor 1 is stopped.

7. Motor 2 can be started normally by operating pushbutton S5.

8. Selector switch S6 provides jogging control for motor 2.

9. Motor 2 can be stopped by operating pushbutton S7.

10. Indicator lamp L3 indicates motor 2 is running.

11. Indicator lamp L4 indicates motor 2 is stopped.

12. Both motor 1 and motor 2 are to be protected by thermal overloads.

13. Control circuit must include protection.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
C Doubt about how to develop a particular system in psim software. Software & IDEs 0
E Develop an transmit circuit using IR led Digital Design 9
E (Load cell) Develop a circuit that reduces the non-linearity error and that does not rely on semicon Sensor Design & Implementation 3
E How can I upgrade/develop this circuit to become more effective, efficient and complex. General Electronics Chat 6
Z Develop a simple stop/start relay control circuit for a three phase motor with forward/reverse. Homework Help 0
Similar threads
Doubt about how to develop a particular system in psim software.
Develop an transmit circuit using IR led
(Load cell) Develop a circuit that reduces the non-linearity error and that does not rely on semicon
How can I upgrade/develop this circuit to become more effective, efficient and complex.
Develop a simple stop/start relay control circuit for a three phase motor with forward/reverse.

You May Also Like

Top