I have a light sensing voice chip module (http://www.invitebyvoice.com/light-sensor-voice-chip.html) which doesn't work quite as well as I'd like it to (the light sensor isn't sensitive enough for my use). I'm wondering if I can cut the light sensor out and replace it with a magnetic switch similar to this (http://www.amazon.com/gp/product/B0009SUF08). If so, would I need to solder, and what sort of wire should I get? I assume if I want the speaker to activate when the magnet is disconnected, I would need to wire for 'normal open'?
Hopefully this makes sense - I have no experience with circuits (only CS background), but can pick things up pretty quickly. Thanks!
Hopefully this makes sense - I have no experience with circuits (only CS background), but can pick things up pretty quickly. Thanks!
Attachments
-
377.9 KB Views: 8