Hello ,I have the following connector from hasco , unfortunetly it doesnt have any STEP file.
https://www.hasco-inc.com/connector...e-2-hole-550-long-flange-accepts-pin-dia-012/

so I found the following link with rf connectors but its mm units.

Is there some way I could find the step file of my inch connector in to mm connectors below?
Thanks.
https://www.samtec.com/picturesearc...0oiRFlEQT_SyB3mKRiNt2-Qtk8BYIsLoaAtr_EALw_wcB

 

Multiply inches by 25.4 to get mm.

 

I can't find that exact part. Try this link. connector
I can find .stp files for the 300- series.

 

Hello ronsimpson,how did you see that these connectors are close enough?
by what parameters?
https://www.digikey.ca/en/models/5148371
https://www.hasco-inc.com/connector...e-2-hole-550-long-flange-accepts-pin-dia-012/