I have 2 x 12.5v capacitor arrays made from 2.5v 1F caps.
After an operation in my circuit I have 6v in one array and 10v in the other.
I want to move 2.5v from the 6v up into the 10v array in the most efficient way. So the ideal result would be 3.5v in one array, and 12.5v in the other.
I have been reading an article on inductive charging by @crutschow which look to be what I need (https://bit.ly/2lJlB16)
I think I need a custom version of this circuit to match my components.
I'm not good with Spice and I can't understand the schematic on the page, but I would like to learn what's happening in that schematic, and build it at http://www.falstad.com as I have a bit of experience with that simulator.
The screenshot of the circuit published by crutschow:
After an operation in my circuit I have 6v in one array and 10v in the other.
I want to move 2.5v from the 6v up into the 10v array in the most efficient way. So the ideal result would be 3.5v in one array, and 12.5v in the other.
I have been reading an article on inductive charging by @crutschow which look to be what I need (https://bit.ly/2lJlB16)
I think I need a custom version of this circuit to match my components.
I'm not good with Spice and I can't understand the schematic on the page, but I would like to learn what's happening in that schematic, and build it at http://www.falstad.com as I have a bit of experience with that simulator.
The screenshot of the circuit published by crutschow:
Last edited by a moderator: