Hi everyone,
I need some expert help. Problem is that whenever I connect RCA to any device the buzzing, noise starts coming from speakers. There is less noise when only one input is attached. If there is no connection, little bit.
I disconnected the input ground and negative path with a 10 ohm resistor. But there was no change. TL082 replacement to OPA2134; no changing.
What solution do you think I should find?
Thank you in advance for your help
I need some expert help. Problem is that whenever I connect RCA to any device the buzzing, noise starts coming from speakers. There is less noise when only one input is attached. If there is no connection, little bit.
I disconnected the input ground and negative path with a 10 ohm resistor. But there was no change. TL082 replacement to OPA2134; no changing.
What solution do you think I should find?
Thank you in advance for your help
Attachments
-
726.4 KB Views: 14
-
606.8 KB Views: 15
-
900.9 KB Views: 15
-
1.3 MB Views: 18
-
62.2 KB Views: 23
-
1.6 MB Views: 19
-
1.5 MB Views: 12