About tablet and lion battery charger

Thread Starter

sony85

Joined Aug 26, 2012
43
TP4056-1A-Battery-Charger-Module-2.jpg I have an tablet which micro usb jack mask burnt out and i had to find other solution tocharge my tablet. Than i bought Li-on battery charger module

Specification of the modul
  • Module Name: rechargeable lithium battery plate
  • Method: linear charge 1%
  • Charging current: 1A Adjustable (Through RPROG)
  • Charge Accuracy: 1.5%
  • Input voltage: 4.5V-5.5V
  • Full charge voltage: 4.2V
  • Charging indicator: red green full charge
  • Charging input interface: mini USB
  • Working temperature: -10 Degree to +85 Degree
  • Polarity Reversal: NOT ALLOWED
My question is how can I make it work Charge the battery and tablet to be on at the same time ?
Is it possible .
Thanks
 

Dodgydave

Joined Jun 22, 2012
11,284
You need to solder the batt terminals to the tablet battery connection, then it will charge it up, there may not be enough current to run it at the same time,

datasheet

what tablet make and model is it.
 
Last edited:
Top