For some time now I've taken an interest is making battery cells using conductive ink on collecting plates with separator and liquid electrolyte.
After months of experimenting I have made 20 of them. Each cell is initially holding about 1.3V. Even though I connect several in series and parallel it's not enough to power anything. Not even a small light bulb.
Any advice or comments folks ?
I've followed Robert Murray-Smith's 'You Tube' tutorials on making these to the letter and have emailed him with no response.
I know lithium-ion is the way to go but these seemed interesting,were cheap to make and they charged really quickly
After months of experimenting I have made 20 of them. Each cell is initially holding about 1.3V. Even though I connect several in series and parallel it's not enough to power anything. Not even a small light bulb.
Any advice or comments folks ?
I've followed Robert Murray-Smith's 'You Tube' tutorials on making these to the letter and have emailed him with no response.
I know lithium-ion is the way to go but these seemed interesting,were cheap to make and they charged really quickly