Hi,
I've been programming modules e,g, GPS Compass etc, on 18LF4520 PIC. They all work but need more work.
I now use 18F4620 PCB which has enough memory to put all of the modules on. My method is a cut and paste, which I'm sure isn't proper programming, but that's the best I can do.
Here is the latest program, which need me to sort out:
Attached image showing the SPI SCK working to a point, then stopping. It stops around the CALL_CLEAR() section of the program, and this is what I'm trying to get working.
Camerart.
I've been programming modules e,g, GPS Compass etc, on 18LF4520 PIC. They all work but need more work.
I now use 18F4620 PCB which has enough memory to put all of the modules on. My method is a cut and paste, which I'm sure isn't proper programming, but that's the best I can do.
Here is the latest program, which need me to sort out:
Attached image showing the SPI SCK working to a point, then stopping. It stops around the CALL_CLEAR() section of the program, and this is what I'm trying to get working.
Camerart.
Attachments
-
55.9 KB Views: 7
-
19.9 KB Views: 6