servo motor

Hi All, I want to turn a rudder like mechanism and currently I use DC motor and polarity to turn it left & right. But It has a limitation that it can cannot be positioned in between. Now I want this extra position to be included. So thinking about a servo to achieve three positions ( left - 0...

So I am designing and building a 6 axis robotic arm and I really need help finding the right library and communication method to talk to the bus servos I have installed. This is the product page and this is the google drive with the documentation that the manufacturer provided. I also put an...

I know nothing about any of this but curious how difficult and what would needed to create a battery powered 90 degree servo motor with push button to activate. Need it to rotate 90 cw the 90 ccw. For my project the arm attached to the motor would lay under a paddle and would be used to rotate...

Hello. I want to control a servo motor using a time relay in a project. How can I do that?

Hi guys, recently Iam making a project which includes Arduino Nano, MPU6050, BMP280, micro SD card module and a servo motor. Brief explanation of my project is basically I am trying to collect data from the MPU6050 and BMP280 and log that data with the help of a micro SD card module and the job...

Hello! I recently built a scale model of the Jurassic Park Entrance gates but when I was getting ready to finally be done with it I had the thought I could add a servo or two in order to make the doors automatic. In researching this I decided, well, why don't I add a soundboard and some mini...

I have a marble sorting project in which I want to use a load cell to move my servo motor a certain degree. I have calibrated the load cell so it measures my weights accurately, but I need to incorporate code that uses this measurement to move the servo. I'm using the Arduino app with an HX711...

I am currently programming an Elmo Gold Solo Trombone drive as a slave (for the position control of a servo motor) for a host ECU (Altran MUXlab4), communicating between the host and drive on a CANopen protocol. Despite having read all the available literature am a little unclear on how to do...