Hi all,
I have implemented a WPT system with communication in both ways using ASK. When I connected communication part on RX side the same way as on TX, there just was not enough amplitude change to be detectable on TX side. So I made communication part using two mosfet and capacitor. That was...
Hello AAC forum this is my first post here and I thought I'd ask for any advice on my current robotics quandry.
The design so far:
40x 18650 3500 mAh cells in a 10S4P configuration to output 36V @ 14Ah
From this pack I need to work out some configuration of a buck/boost current limited...