lm2679

Hello I have a PCB I use for testing some electronic circuits that contains several negative and positive power rails, with maximum voltages possible being -20v and 20v. The power supplies sources are LM2673 IC's and the current is limited to around 1A. I am looking for an over-voltage...

I am designing a constant 5 volt output switching regulator that bucks 12 to 24 volts down to 5 volts while supporting 5 amps. It is used to boot up a Raspberry Pi with a 10 inch screen. At 12 volts, the Pi will boot up fine. At 24 volts, around halfway through the bootup, the regulator will...