high power led

  1. -live wire-

    How to drive power LED?

    What is a good driver for a 30W RGB LED? I got it ages ago then forgot about it but might want to use it in a project now. Here is a picture, also I would like the driver to be able to be controlled with an arduino. This is the link, but don't worry I also put a heatsink and fan on the back of...
  2. A

    design 4A led driver for automotive application

    hello I am designing high power led lamp for vehicles using this led. led datasheet this led has If up to 6A and Vf is around 3 V, I am going to use it at 4A for longer life. My input voltage source is car battery so voltage range is 12V - 16 V I am hoping to connect two leds in series. since...
  3. Dan Aronin

    XL6005 understanding the datasheet

    Hi all, a driver circuit needed for lighting a 30W LED* (one color) - I had a look at the XL6005 datasheet and wanted to make sure I understand it properly based on the following diagram**: 1. To drive the LED with 300mA I should make RS = 0.73 ohm (ILed=0.22/0.73=0.3A) 2. To limit the max...