decoding

  1. K

    When to use Pull-Up Resistors on read/write pins of Memory connected to the 8085

    Hi, I noticed that 4.7k ohm pull-up resistors are used in this circuit on the read/write memory pins: Saundby's MAG 85(scroll down to yellow text), but in other circuits where the read/write / io/m signals are decoded by the 74138 for example, pull-ups are not used? Is it because in the MAG 85...
  2. K

    8085 Address Decoding

    Hi, I think that this looks correct, please confirm. I am ONLY showing my connection to the 62256 32k x 8 ram CE pin that I added to the web page picture, slide 15: When A13,A14,A15 are all low, the 2764 should be selected. When A15 is high, the 62256 should be selected. Keiichicom
Top