Home Door Alarm

im making a door alarm for my final GCSE project it uses keypad, pic chip, led piezo sounder all he usual suspets



but now i need help.. just wondering if any body can help me i need to know how i would go about wireing up an LCD screen and also a Reed switch
The LCD:http://www.rapidonline.com/Educatio...-Kits/LCD-Mini-message-board-kit/74570/kw/lcd
The Reed Switch: http://www.rapidonline.com/Electron...Proximity-reed-switch-ABS-cased/61738/kw/reed

Thnks in advance for any help!

Use a NO reed sw.[no magnet close ], mount on door frame. Mount magnet on door close to switch. Check for sw. continuity with door closed.

I don't know what you're using to create your schematic, but you'd be better off using something like Cadsoft's Eagle Layout Editor.
http://www.cadsoftusa.com/

It's quirky to learn in the beginning, but you can go from making a schematic to generating a PCB. The free version is limited to 2 layers, and 3"x4" boards - but you can still do a lot with it.

There are a number of Microchip uP's in the libraries already.

You might consider using a PIC16F886 or PIC16F887; they have a reasonable amount of memory, lots of I/O pins, you don't have to fiddle with an external oscillator or crystal, and they're inexpensive.