Make With Mouser IoT Design Contest- Baby Vital Monitor_01 Introduction

This is my 4th blog entry regarding the project "Baby Vital Monitor" for "Make With Mouser IOT Design Contest". In this blog post I am sharing my work on Bio-impedance measurement. The basic idea or goal is to relate the skin impedance with body hydration parameters. I'll share my experience of...
This blog entry is posted as a part of the "Make With Mouser IOT Design Contest". This is my 3rd blog entry regarding the project "Baby Vital Monitor". I'll be covering some basics of single LEAD ECG and share my experience of acquiring ECG by constructing a simple Biopotential measurement...
Introduction: My design proposal is to develop a Vital Monitor for babies using the Analog Devices Inc. EVAL-ADPD4100Z-PPG Evaluation Board. This project work intends to try out the EVAL-ADPD4100Z-PPG Evaluation Board to be used to measure SpO2 using PPG, Heart rate with single LEAD ECG and...
SpO2: SpO2 is the measurement of percentage of oxygen saturation in blood. The basic principal is Photoplethysmography [PPG]. In this blog, I’ll share my experience on PPG experiment following traditional method. And then I’ll share how we can use the ADPD4100 for this purpose. I worked with...

Blog information

Author
Sunnyiut
Blog entries
4
Last update

Share this blog

Top