jrap's Blog

jrap
Views
636
Posting project on behalf of user diamondjimkoehler: Continued from Part 1 For diagnostic purposes, the oven program creates graph, named “temp.png”, after it has completed the reflow process. This graph shows the input temperature profile it was following as well as the actual temperature...
jrap
Views
2K
Reaction score
1
Posting project on behalf of user diamondjimkoehler: Introduction A few years ago, I wrote an article , published in QST, the ARRL journal, describing how a simple toaster oven could be used for reflow soldering of printed circuit boards. This article was voted to be the "Best article of the...

Blog information

Author
jrap
Blog entries
2
Last update

Share this blog

Top