I have a single Slip constructed from copper clad sleepers and Nickel silver rail and cannot work out how to wire it.
It is described as an outside slip but the slip rails are only partly outside the crossover rails.
I have looked at the Single Slip wiring diagrams on C&L and P4 websites but neither are showing this type of construction
and I have also been given verbal advice that I only need four wires to make the thing work.
I cannot see this as, when in operation, some rails appear to need to be wired to represent up to three different coloured wiring connections.
I can supply a sketch if anyone can help.
Any advice would be appreciated.
Thanks
It is described as an outside slip but the slip rails are only partly outside the crossover rails.
I have looked at the Single Slip wiring diagrams on C&L and P4 websites but neither are showing this type of construction
and I have also been given verbal advice that I only need four wires to make the thing work.
I cannot see this as, when in operation, some rails appear to need to be wired to represent up to three different coloured wiring connections.
I can supply a sketch if anyone can help.
Any advice would be appreciated.
Thanks
Last edited by a moderator: