Hello everyone,
I am trying to copy this circuit using the LM7809.
If this is connected directly to my 12V 70 Ah solar battery will I encounter any issues using SMD components? I plan to place a heatsink on the LM7809 chip. Looking on Digikey, should I buy a 16V 0.33uF ceramic capacitor for C1 and 16V 0.1uF for C0?
Also, I am struggling to find the correct surface mount capacitor in the Eagle software. Can I just use small SMD style ceramic capacitors like these:
https://www.digikey.com/product-detail/en/kemet/C0603C334K4RACTU/399-4916-1-ND/1090911
https://www.digikey.com/product-det...hanics/CL05F104ZO5NNNC/1276-1004-6-ND/3891518
I am mostly worried about choosing the wrong footprint for the board and not thinking of all the things that could cause damage.
I am trying to copy this circuit using the LM7809.
If this is connected directly to my 12V 70 Ah solar battery will I encounter any issues using SMD components? I plan to place a heatsink on the LM7809 chip. Looking on Digikey, should I buy a 16V 0.33uF ceramic capacitor for C1 and 16V 0.1uF for C0?
Also, I am struggling to find the correct surface mount capacitor in the Eagle software. Can I just use small SMD style ceramic capacitors like these:
https://www.digikey.com/product-detail/en/kemet/C0603C334K4RACTU/399-4916-1-ND/1090911
https://www.digikey.com/product-det...hanics/CL05F104ZO5NNNC/1276-1004-6-ND/3891518
I am mostly worried about choosing the wrong footprint for the board and not thinking of all the things that could cause damage.