Hi there,
I am trying to build an emergence light using a 6V battery, High intensity LED lights and a 6V 5-pin Relay.
I am attaching the circuit diagram and need your comments and suggestions.
Circuit works as follows
I will be using 2 or 3 high intensity LED light in series to meet 6V voltage. so according to diagram battery will be normaly connected to the LEDs via pin 30 to 87A contact and when charger is turned on, relay will connect input voltage from 30 to 87 and hence light will turn off automatically and battery will start charging.
Regards,
Nasir
I am trying to build an emergence light using a 6V battery, High intensity LED lights and a 6V 5-pin Relay.
I am attaching the circuit diagram and need your comments and suggestions.
Circuit works as follows
I will be using 2 or 3 high intensity LED light in series to meet 6V voltage. so according to diagram battery will be normaly connected to the LEDs via pin 30 to 87A contact and when charger is turned on, relay will connect input voltage from 30 to 87 and hence light will turn off automatically and battery will start charging.
Regards,
Nasir
Attachments
-
19.2 KB Views: 118