Using 1 C8051F120DK to set 2 nRF24L01 into TX mode and RX mode respectively

Papabravo

Joined Feb 24, 2006
13,940
A careful examination of the schematic in the second document shows that they are connected to bits of Port0. See the little blue notations next to Connector J1?
 

Thread Starter

alkid

Joined Sep 20, 2007
12
sry do you mean the nRF24L01 but the part i want know is the C8051F120DK what port to CE, CSN and IRQ if i mistaken please correct me sry :)
 

Papabravo

Joined Feb 24, 2006
13,940
The signals that you mentioned by name CE, CSN, IRQ are connected to the pins of PORT0. Check the notation on the schematic next to the large connector J1
 
Top