TVS diodes clamping Voltage is 57V and if I/P voltage > 57 V then diode would burn ?
Nohi L,
Welcome to AAC.
If the current thru the TVS was not limited in some way it would over heat.
Do you have a burn out TVS problem.?
E
Or blow the fuse.hi L,
Welcome to AAC.
If the current thru the TVS was not limited in some way it would over heat.
Do you have a burn out TVS problem.?
E
A fuse blowing would limit the current???If the current thru the TVS was not limited in some way
It certainly would.A fuse blowing would limit the current???
A fuse in series with a TVS diode is the typical way to protect the TVS diode when it conducts due to over voltage.A fuse blowing would limit the current???
by Aaron Carman
by Duane Benson
by Aaron Carman