I am in need of a transformer with the following characteristics:
Turns ratio 1:8
Primary: 12V square wave @ 100mA (120 Ohms impedance)
Secondary: 96V square wave @ around 1mA (9600 Ohms impedance)
Operating Frequency 6.5kHz-20kHz
The transformer will have 2 secondary coils wound together. Each secondary coil needs to output 96V @ around 1mA, only 1 coil will be used at a time.
Is there any easy way to design such a coil?......I contacted an engineering company and they want 1 grand just to start the project....
The coil is not for anything important, just for hobbies so I don't need exact specs, just something that will work!
Turns ratio 1:8
Primary: 12V square wave @ 100mA (120 Ohms impedance)
Secondary: 96V square wave @ around 1mA (9600 Ohms impedance)
Operating Frequency 6.5kHz-20kHz
The transformer will have 2 secondary coils wound together. Each secondary coil needs to output 96V @ around 1mA, only 1 coil will be used at a time.
Is there any easy way to design such a coil?......I contacted an engineering company and they want 1 grand just to start the project....
The coil is not for anything important, just for hobbies so I don't need exact specs, just something that will work!
Last edited: