No.With the red LED's you must use 5 LED's in series and with the extra 2V and you require 20mA then use a (R=V/I R=2/0.02=100Ohms).
On another website the spec's for the LEDs were shown. The "2V" red and yellow LEDs have a maximum forward voltage of 2.4V (not 2.0V) so five in series will cause NO CURRENT in the current-limiting resistor and in them.
On the other website I made many calculations with 2.0V LEDs and 2.4V LEDs and with 3 and 4 in series.
The spec's for the blue and green LEDs were also shown on the other website. Their maximum forward voltage is 3.8V (not 3.3V) so I also showed many calculations if the LEDs were both voltages.