Testing a TSOP1738

hgmjr

Joined Jan 28, 2005
9,027
Hi could any one help me to test the tsop1738 is good or not........?
Greetings rvm.karthi.

Posting your question on more than one forum is a perfectly good way to cross check suggested solutions. It also gives you a larger audience for your specific problem since others may have your same problem and can benefit from the suggestions provided.

hgmjr
 

Thread Starter

rvm.karthi

Joined Dec 29, 2009
13
That circuit is simple, 100 Ohm serious with input 5vdc and 10k parallel with i/p and o/p then 4.7 microfarad with i/p and ground....
 

bertus

Joined Apr 5, 2008
22,270
Hello,

That is said in the FAQ:

Attachments and Images

How do I attach a file to a post?
To attach a file to your post, you need to be using the main 'New Post' or 'New Thread' page and not 'Quick Reply'. To use the main 'New Post' page, click the 'Post Reply' button in the relevant thread.
On this page, below the message box, you will find a button labelled 'Manage Attachments'. Clicking this button will open a new window for uploading attachments. You can upload an attachment either from your computer or from another URL by using the appropriate box on this page. Alternatively you can click the Attachment Icon to open this page.
To upload a file from your computer, click the 'Browse' button and locate the file. To upload a file from another URL, enter the full URL for the file in the second box on this page. Once you have completed one of the boxes, click 'Upload'.
Once the upload is completed the file name will appear below the input boxes in this window. You can then close the window to return to the new post screen.
What files types can I use? How large can attachments be?
In the attachment window you will find a list of the allowed file types and their maximum sizes. Files that are larger than these sizes will be rejected. There may also be an overall quota limit to the number of attachments you can post to the board.
How do I add an image to a post?
If you have uploaded an image as an attachment, you can click the arrow next to the 'Attachment Icon' and select it from the list. This will be inserted into your post and can be located where you want it displayed.
To include an image that is not uploaded as an attachment and is located on another website, you can do so by copying the full URL to the image, (not the page on which the image is located), and either pressing the 'Insert Image' icon or by typing
after it, ensuring that you do not have any spaces before or after the URL of the image. You can insert pictures from your albums (?) in this way too.
Succes,
Bertus
 

Audioguru

Joined Dec 20, 2007
11,248
A bitmap uses very many digital bytes. Convert it to a PNG file type that uses few bytes and is very clear. Use Microsoft Paint program to convert it.
 

Audioguru

Joined Dec 20, 2007
11,248
The datasheet for the TSOP1738 shows that its output goes low (with a fairly low amount of current drive) when it receives IR bursts of 38kHz. Without a modulated IR input it output is normally high like yours has.
 
Top