(I apologise in advance if I might have posted this in the wrong forum group)
Hi guys, I have done a bunch of research lately on the possibility of tapping my Arduino prototyping project onto an e-Scooter which runs on a 36V d.c battery source. I have so far managed to identify 2 possible components that makes it possible:
P.S. I am also hoping to tap into the speedometer, brakes, the basic functions of almost all e-scooters in general.
Hi guys, I have done a bunch of research lately on the possibility of tapping my Arduino prototyping project onto an e-Scooter which runs on a 36V d.c battery source. I have so far managed to identify 2 possible components that makes it possible:
- d.c. step down (for stepping down the voltage to 3.3V~5V) - for channeling the current to my arduino boards and sensors.
- Relays (I have ordered a few relays online which comes quite cheap. I read and viewed tutorials about how relays can be used to power devices with a higher current/voltage. With the relay work for this case?
P.S. I am also hoping to tap into the speedometer, brakes, the basic functions of almost all e-scooters in general.