T flip-flop from S-R flip-flop

Thread Starter

mr.harm

Joined Nov 24, 2008
29
Hello,
It was a question in exam. Design T flip-flip from S-R flip-flop and state the modification that should be applied on the pulse going to the T input.

any ideas?

thanks.
 

Greg_R

Joined May 5, 2009
11
T flip flop = toggle the output (on each clock edge when T is high). Take a look at the SR truth table and see what input is required. Is that input similar to one of the outputs (Q or Qbar)?
 

Papabravo

Joined Feb 24, 2006
21,094
Since an SR is not clocked and a T is clocked I'm going to be interested in how this might be done. Without thinking about it too hard, I'm going to say I don't think it is reasonable to even pose the problem.
 
Top