Switching and latch problem

Discussion in 'General Electronics Chat' started by vandergriff84, Oct 26, 2010.

  1. vandergriff84

    Thread Starter New Member

    Oct 26, 2010
    Hey there guys,

    I am working on a project with three momentary switches that each need to turn on a relay. But what I want to do is to be able to push one button that turns on and keeps on a relay after relese and while pressed it sends a reset or a turn off to the other switches. So if one switch has been pushed and it turns on one relay and then another switch is pushed it turns on its corresponding relay and turns off the other at the same time. Has anyone had any experience with this kind of set up?
    Last edited: Oct 26, 2010