switching a drives depends upon pressure

Thread Starter

sr_raval

Joined Apr 19, 2012
4
Hello Everyone,

I would like to develop a hardware which can control two drives dpending upon the pressure, insort i want to develop such intelligent hardware which can decide lead and lag functionality between two drives.

For above mentioned two diffrent drives consider that each drives have 2 set point (those setpoint define by user) E.X if X drive have define 2 set point. 50 psi and 40 psi, when X drives pressure goes below 40 psi at that time Y drive on and fullfill the demand of water, in Y drive also there has 2 user define set point.

If anyone have idea how to create a hardware which can switch the X and Y drive, please share your ideas and thoughts.

Thanks in advance.
 
Top