Hi all,
I need a low noise DCDC converter for the 4 input pins of an image sensor. The input voltage is 4.7V and I need three different outputs Voltage of 2.5V, 2.6V, and 2.2Volt, and max.50mA output current.
The sensor needs to obtain low noise relative to its GND or VCC with respect to the reference voltage!
Could anyone tell me how could I find a low noise DCDC, when it is not too much in Datasheets of lots of Converter about Noise?
Thank you in advance with best regards
I need a low noise DCDC converter for the 4 input pins of an image sensor. The input voltage is 4.7V and I need three different outputs Voltage of 2.5V, 2.6V, and 2.2Volt, and max.50mA output current.
The sensor needs to obtain low noise relative to its GND or VCC with respect to the reference voltage!
Could anyone tell me how could I find a low noise DCDC, when it is not too much in Datasheets of lots of Converter about Noise?
Thank you in advance with best regards
Attachments
-
35.1 KB Views: 3
Last edited: