Hi all,
I am looking at replacing some of the Electrolytic Capacitors on the secondary side of my Panasonic VCR SMPS Power Unit, with all 50 volt Tantalum type. Their Capacitances are 3 nos. of 10uF 50v , 3 nos of 100uF 20v, 47uF 50v & a 680uF 50v... I have already tried on a PC SMPS and it has been working fine for last two years with perfect wave output on Oscilloscope
But this being different in this case as it's a 25 year old VCR PC Power Supply, I need your suggestions on whether it's advisable.
I am looking at replacing some of the Electrolytic Capacitors on the secondary side of my Panasonic VCR SMPS Power Unit, with all 50 volt Tantalum type. Their Capacitances are 3 nos. of 10uF 50v , 3 nos of 100uF 20v, 47uF 50v & a 680uF 50v... I have already tried on a PC SMPS and it has been working fine for last two years with perfect wave output on Oscilloscope
But this being different in this case as it's a 25 year old VCR PC Power Supply, I need your suggestions on whether it's advisable.