I recently came across the Linear Technology LT3081, 1.5A, 36V, LDO regulator which allows both voltage and current to be adjusted from maximum to zero, each with a single pot.
It also has analog monitor outputs indicating its internal temperature and output current level.
It thus seemed like a good candidate for a really simple CC/CV bench power supply with a minimum number of parts, so I generated/simulated an example paper circuit design for that, documented here.
Thought it might be of interest to some of you.
Regards,
Wally
It also has analog monitor outputs indicating its internal temperature and output current level.
It thus seemed like a good candidate for a really simple CC/CV bench power supply with a minimum number of parts, so I generated/simulated an example paper circuit design for that, documented here.
Thought it might be of interest to some of you.
Regards,
Wally
Last edited: