SCR

Thread Starter

Denke

Joined Apr 6, 2006
2
Question: there 30V RMS (Vpeak = 42V), 2 A across the SCR. To control the firing angle of that SCR I am using Phase Control - Diode, Resistor, Potentiometer, Capacitor. If the trigger voltage for the SCR is 0.65V and the holding current is 9mA, what are the formulas to calculate Rt (total resistance of the Firing Circuit) and C needed in order to control the firing angle of the SCR between 30 and 150 degrees?
Thank you for reading my messege.
 

Papabravo

Joined Feb 24, 2006
12,304
Originally posted by Denke@Apr 6 2006, 05:40 PM
Question: there 30V RMS (Vpeak = 42V), 2 A across the SCR. To control the firing angle of that SCR I am using Phase Control - Diode, Resistor, Potentiometer, Capacitor. If the trigger voltage for the SCR is 0.65V and the holding current is 9mA, what are the formulas to calculate Rt (total resistance of the Firing Circuit) and C needed in order to control the firing angle of the SCR between 30 and 150 degrees?
Thank you for reading my messege.
[post=15914]Quoted post[/post]​
What's with the multiple posts, ya lid!
 
Top