hello,
i have a manifold of 3 solenoids, 0.17 Amp at 120 Vac each, would i be able to control them with the following rotary switch?
ROTP3P4 - rated at 0.3 Amp at 30 Vdc
this is for a large scale product, and just wanted to be confident that the contacts don't burn prematurely/rapidly.
sorry for the noob question!
thanks
seesoe
i have a manifold of 3 solenoids, 0.17 Amp at 120 Vac each, would i be able to control them with the following rotary switch?
ROTP3P4 - rated at 0.3 Amp at 30 Vdc
this is for a large scale product, and just wanted to be confident that the contacts don't burn prematurely/rapidly.
sorry for the noob question!
thanks
seesoe