Hello All,
If I have to select opamp for any application what all basic technical parameters I need to check before finalizing part.
1. A higher/lower Slew Rate would be preferable and why ???
2. What is impact of GBW(Gain Bandwidth Product) in opamp and how to decide this for any particular application.
A higher/lower GBW would be preferable and why ???
LM358 -
GBW- 700KHz
SR- 0.6V/uS
Or
These answer really meant to me.
Thanks in Advance !!!
If I have to select opamp for any application what all basic technical parameters I need to check before finalizing part.
1. A higher/lower Slew Rate would be preferable and why ???
2. What is impact of GBW(Gain Bandwidth Product) in opamp and how to decide this for any particular application.
A higher/lower GBW would be preferable and why ???
LM358 -
GBW- 700KHz
SR- 0.6V/uS
Or
GBW- 1MHz
SR- 0.1V/uS
Which one in above two is preferable and why.
SR- 0.1V/uS
Which one in above two is preferable and why.
These answer really meant to me.
Thanks in Advance !!!
Last edited: