RF PA power consumption as a function of frequency, bandwidth and modulation
- Thread starter musiige
- Start date
Hello,
The power transmitted versus the power used by the PA depends on the modulation type.
Here is a page with links on the variety of modulation techniques:
http://www.ycars.org/EFRA/Module B/Module B Index.htm
This is a link from the EDUCYPEDIA page on analog modulation techniques:
http://www.educypedia.be/electronics/modulation.htm
Bertus
The power transmitted versus the power used by the PA depends on the modulation type.
Here is a page with links on the variety of modulation techniques:
http://www.ycars.org/EFRA/Module B/Module B Index.htm
This is a link from the EDUCYPEDIA page on analog modulation techniques:
http://www.educypedia.be/electronics/modulation.htm
Bertus
Hello,
The attached PDF will probably give a lot of information.
A lot of theory and practical articles can be found in this book from the ARRL:
http://www.arrl.org/shop/The-ARRL-Handbook-2011-Hardcover-Edition/
Perhaps you can take a look in a library to have a look in it.
Bertus
The attached PDF will probably give a lot of information.
A lot of theory and practical articles can be found in this book from the ARRL:
http://www.arrl.org/shop/The-ARRL-Handbook-2011-Hardcover-Edition/
Perhaps you can take a look in a library to have a look in it.
Bertus
Last edited:
You May Also Like
-
NXP Launches Open S32 CoreRide Platform for Software-Defined Vehicles
by Aaron Carman
-
Allegro Microsystems Launches High-Bandwidth Current Sensors for EVs
by Jake Hertz
-
Onsemi Intros 7th Gen IGBT-based Intelligent Power Modules
by Jake Hertz
-
Efficient Discrete Logic Implementation Using MCU Complex Logic Blocks
