RF comm b/w USART

Discussion in 'Embedded Systems and Microcontrollers' started by arun_ec, Apr 17, 2011.

  1. arun_ec

    Thread Starter New Member

    Nov 12, 2009
    I am using RF module(FS1000A 315 MHz Wireless Radio Transmitting Module and PCR2A 315 MHz Wireless Radio Recieving Module) for communication b/w two USART of atmega16. But there is parity error coming which is making comm. erroneous. I want immediate help. Please post answer or mail me at <snip>

    Moderator's note: These forums are public. All information should be in the public view. Soliciting private answers is contrary to the purpose of the forums, which is to make electronic information visible to all.

    Further - the membership is composed of people who contribute their time and knowledge on a voluntary basis. It is up to the individual member to decide to offer assistance.
    Last edited by a moderator: Apr 17, 2011
  2. HallMark


    Apr 3, 2011
    I have designed UART communication with use of RF 2.4 GHz and the module was RFM70. dunno much that how to do the same for USART.
  3. terra

    New Member

    May 12, 2011
    First to identify the error comes from your USART or RF to do that
    1. Connect the MCU to PC via Serial port, using Hyper terminal or equvalent program to see any error(Hyper terminal only ascii charactres)