I'm working on a signal conditioner circuit for PT100. I found this awesome app note.
There is an example circuit which provides outputs of 0.97V at -100°C and 2.97V at 200°C
[Source]
My Temp range is -20'C to 150'C where PT100 is 92.16 ohms to 157.32 ohms respectively.
How can I adjust this output to 0-10V level? Any help would be really useful.
There is an example circuit which provides outputs of 0.97V at -100°C and 2.97V at 200°C
[Source]
My Temp range is -20'C to 150'C where PT100 is 92.16 ohms to 157.32 ohms respectively.
How can I adjust this output to 0-10V level? Any help would be really useful.