PS3 controller touch switch

Discussion in 'The Projects Forum' started by jaylaudeman, Jan 24, 2009.

  1. jaylaudeman

    Thread Starter New Member

    Dec 30, 2008
    Ok what I am attempting to do is making a custom guitar hero game controller for my ps3. My proto worked for the ps2 controller but the ps3 circuitry is a different and now I'm not sure what to do. On the board for the guitar you have 3 (I guess you would call them common points) going to the 5 buttons. As you can see in the picture for the button circuit board one of those goes to the green and then one is split to the red, yellow, and blue, then the last to the orange. Those three points measured 1.6mV when testing from the battery to the point. The other 5 points going to the buttons measured 116mV, 71mV, 92mV, 74mV, and 62mV. The circuit orginally designed was the touch activated circuit using the ZVNL110A, which worked for the ps2 but not this one. Does anyone have any ideas how I can get it to work with this touch activated circuit or another touch activated circuit? Thanks