Good morning electronics people
I need some advice/help in designing/building a prototype
I need to build a device that acts as an alarm so when something is taken it contacts people via there mobile phones.
I install alot of cable throughout UK and with the theft of cable still on the increase i need a device that I can connect to a cable and when someone takes it, it sends a signal to piece of monitoring software which in turn contacts a series of mobile phones to alert of the theft.
Has this got to be designed and built from scratch or are there components you can buy and bolt together to get a finished and working product.
These units would have to be self powered as they are in remote locations so a battery unit and a sending unit would be required
Thanks in advance for any suggestions or advice
Mike
I need some advice/help in designing/building a prototype
I need to build a device that acts as an alarm so when something is taken it contacts people via there mobile phones.
I install alot of cable throughout UK and with the theft of cable still on the increase i need a device that I can connect to a cable and when someone takes it, it sends a signal to piece of monitoring software which in turn contacts a series of mobile phones to alert of the theft.
Has this got to be designed and built from scratch or are there components you can buy and bolt together to get a finished and working product.
These units would have to be self powered as they are in remote locations so a battery unit and a sending unit would be required
Thanks in advance for any suggestions or advice
Mike