Power meter PM100

Discussion in 'General Electronics Chat' started by superway, Dec 13, 2012.

  1. superway

    Thread Starter Active Member

    Oct 19, 2009

    I have a Voltech Power Meter PM100 ( single phase). In the rear of meter has 5 slots: 2 slots for Voltage H and L, 2 slots for current H and L, 1 slot for external current.

    Now I used an AC source PS ( Elgar) to connect 120 voltage phase A to slot Volt H of PM100, and another 120 Volt phase B to slot Volt L of PM100, then I will see 240Vac on display of PM100. I have a load 1700W connect across to phase A and phase B of AC source PS. But I want to measure AC output current from load 1700W on PM100. Can anyone show me how to connect this load to PM100 in order to monitor the AC output current?

    Please help