PMSM motor control with a use of SVM

Discussion in 'Embedded Systems and Microcontrollers' started by chinmay_shah, Feb 12, 2011.

  1. chinmay_shah

    Thread Starter New Member

    Feb 11, 2011
    Hi All,
    I:confused: want to run the PMSM motor using micro-controller dsPIC33F. the motor should be run in such a way that initially it may operate in open loop, of course using Space Vector Modulation (SVM), and then it will go in a closed loop where it will read the value of feedback current by ADC, and should be operate on a constant speed using PID control.

    I've already designed schematic and all, but can't run the motor in open loop using svm.

    if any of u have d solution, plz tell me.